WORKSTAR 523 INSPEKTOR UV LED NON-DESTRUCTIVE LIGHT

• The rugged MAXXEON WorkStar® 523 Inspektor is designed for daily NDT (Non-Destructive Testing) of metal parts and castings by technicians in a demanding inspection, manufacturing, industrial and maintenance environments. This cordless, compact UV LED Non-Destructive Inspection Light produces a powerful beam of 365 nm UV light that works with all NDT fluorescent dyes. The LED's narrow spectrum does not contain any white light components that would reduce the contrast.
• The 365 nm UV beam of the WorkStar 523 is also ideal for oil and water fluorescent leak detection dyes.
• Powered by two CR123A lithium batteries, the WorkStar 523 is completely self-contained, unlike traditional non-destructive testing bulbs that are tethered to a 12v or 120v external power source. And, unlike fragile UV bulbs, the Inspektor’s LED is virtually indestructible.
• This 5" non-destructive inspection light weighs only 5 ounces and it clips comfortably into any pocket - always at the ready! The tough T6 aluminum body is anodized in a bright shade of violet so it is easily identified. Knurled surfaces provide good grip and they look great. Threaded joints have rubber O-ring seals, so it is water resistant. The rugged tailcap switch is rated at 100,000 cycles and is sealed with a GITD (glow-in-the-dark) rubber cap to avoid contamination by dirt and grit. Once the rear switch is activated, there is a handy secondary on/off switch at the front of the body, which provides convenient control when hand-held.

Applications

• Document and lab analysis
• Crime scene investigation
• Hairline crack detection
• Paint authentication
• Currency verification
• Bacteria detection
• Gem inspection
• UV curing

Specifications

• LED Brightness (Radiant Flux) — 210 mW emitter radiant flux
• LED, Wavelength, Power — LEDEngin, UltraViolet (UVA) 365 - 370 nm, 5 W
• Forward Current — 1000 mA
• Battery Voltage Range — 6.0 - 4.5 volts
• Batteries included — 2 CR123A lithium
• Run time with lithium batteries — 1.5 hours with typical intermittent use
• Reflector — Custom designed spot reflector with Orange Peel finish
• Lens — Glass
• Aluminum Body & Head — T6 Aluminum with Violet Type II Anodizing
• Overall length — 5 3/8 inches (13.6 cm)
• Head Diameter — 1 inch (25 mm)
• Body Diameter — 7/8 inches (22 mm)
• Tailcap Switch — Click ON / Click OFF - plus half-press momentary ON; Equipped with a GITD (glow-in-the-dark) rubber cap that seals out dirt and grit
• Front Switch — Click ON / Click OFF - provides convenient control when hand-held and the rear switch is ON; Equipped with a black rubber cap that seal out dirt and grit
• Body Diameter — 7/8 inches (22 mm)
• Weight — 5 ounces (142 grams) with batteries
• Water Resistant — Threaded joints have rubber O-ring seals & tailcap and front switches are sealed with rubber caps
• Included — WorkStar 523, pocket clip, 2 CR123A lithium batteries